Serving Dartmouth Since 2019 · Certified & Insured (902) 449-2551

Stove Repair
Dartmouth

A burner refusing to light, or one stuck at full heat, both usually trace back to something small before anything larger.

Technician repairing a stovetop in Dartmouth
What We Fix

Common Fridge Problems

Tap through to see what's usually going on and how we handle it.

Sparks, Never Lights

Clicking continues, gas never catches. Either the igniter has shifted, or a clogged port is stopping the spark from connecting.

Won't Come Down From High

Turn the dial anywhere, still full blast. Stuck switch behind that knob, not the burner itself.

Clicks Without Ever Lighting

Past a minute, still no flame. Trapped dampness or buildup inside the igniter housing gets in the way of a clean spark.

One Won't Heat At All

Others work fine, one's stone cold. A break inside that coil, visible once pulled out.

Spins With No Click

No resistance at all. Worn spring inside, unrelated to the burner or valve.

Burns Off-Color

Should be clean blue. Yellow or uneven points to a partly blocked port.

Types We Service

  • Gas
  • Electric
  • Induction
  • Dual-Fuel
Error Codes

Decoding The Display

Every manufacturer does this a little differently, so treat these as general patterns rather than your model's exact manual.

E1Sensor on an electric or induction unit is off.
E2Overheat protection shut things down.
E3Incoming voltage is irregular.
E6Panel lost contact with the board.
FFault logged in a burner circuit.
PFBrief power drop mid-use.

Manufacturers rarely agree on these, so use the list as a starting point rather than your exact manual. If yours keeps returning after a reset, have someone come read it properly.

Brands We Know

All The Major Brands, Covered

Whirlpool KitchenAid Maytag GE Samsung LG Frigidaire Bosch Kenmore Electrolux
Word Around Town

Stove Calls, From Dartmouth

What customers said once their stove was sorted.

Front burner clicked away right as guests arrived. Igniter had shifted. Nudged back, lit right up.

Wolfgang K.

Back burner stayed cold no matter what. Break inside the coil. Replaced, heats evenly.

Hyacinth V.

One burner only ever ran full blast. Switch behind it jammed. Fixed same visit.

Sedgwick B.

Walked us through the fix start to finish. Four stars, part took an extra day.

Delphine S.

Knob spun freely, no setting caught. Spring had worn out. Fast, cheap fix.

Percival F.

One burner burned yellow instead of blue. Blocked port. Cleared, burns clean now.

Thistlewood M.

Quick Checks First

Worth Ruling Out Yourself

Quite a few service calls end up being something small you could've caught on your own.

Clean out the burner ports

Debris clogs the tiny holes. A soft brush clears it.

Confirm the knob clicks properly

Should land firmly on a setting.

Verify gas or power supply

Valve open, or breaker on.

Check grate positioning

A grate sitting off can confuse the igniter.

Wipe down the igniter tip

Grease weakens the spark noticeably.

Look for a tripped breaker

Especially after a storm.

Ran through all that and nothing changed? It's likely something a proper visit can sort out. Book a technician and we'll take it from there.

Ready When You Are

Book Your Repair

Drop your info below and expect a call to nail down the timing.

Prefer to talk it through? (902) 449-2551

OEM Parts Used Upfront Pricing Local Technicians